CONTROL INSTRUMENTATION CABLES 500V FLAME RETARDANT
RE-2G(St)HSWAH-CI FE180 HALOGEN-FREE FIRE RESISTANT (CI) INSTRUMENTATION CONTROL CABLES, EN 50288-7
Marking
BIRTAS KABLO RE-2G(St)HSWAH-Cl FE 180 5 x 1mm2 2640 43 005 500 V EN 50288-7 IEC 60331 Part no GOST-R CE....m
Applications
These cables are used for control purposes (e.g. controlling of pumps, valves or engines) at chemistry and petrochemistry industry plants, power plants, natural gas and petroluem plants, etc... These cables are used on the basis of a fixed operating mode, can continue with the supply of a power under the existing fire conditions and in the environments which have no corrosive gases are emitted in the event of fire. In case of fire, these cables inhibit the propagation of the flames whereby the development of smoke is extremely low. Instrumentation cables are not allowed for direct connection to a low impedance sources, e.g. public mains electricity supply. With blue sheath it is suitable for intrinsically safe systems. The armour above the inner sheath protects the cable from mechanical shocks. These cables are recommended for direct burial. They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits.
Cable Design
Conductor
Plain copper wire, stranded IEC 60228 Sınıf 2, TS/DIN EN 60228 Sınıf 2
Insulation
Special silicone rubber compound
Core identification
Black cores numbered 1-2-3… Other core configurations manufactured upon request.
Lay-up
Cores laid up in layers of optimum pitch
Separator
Polyester tape
Screen
AL-PES tape over stranded tinned copper drain wire 0,50 mm2
Inner sheath
HFFR compound, EN 50290-2-27
Armour
Galvenized round steel wire, EN 10257-1
Outer sheath
HFFR compound, EN 50290-2-27
Sheath colour
RAL 9005, Black or RAL 5015, Blue
Technical Data
Min. bending radius
10 x D
Flame test
IEC 60332-1 & TS/DIN EN 60332-1 IEC 60332-3 & TS/DIN EN 50266-2-4
