INSTRUMENTATION CABLES 300V PVC D.K. PE -70 DEGREE
RE-2YCY-fl-PIMF INSTRUMENTATION CABLES, EN 50288-7 MULTI-PAIR, PE INSULATED, INDIVIDUAL & COLLECTIVE SCREENED, PVC SHEATHED
Marking
BIRTAS KABLO RE-2YCY-fl PİMF 8 x 2 x 0.75mm2 1668 42 008 EN 50288-7 -70˚ C Part no GOST-R CE....mt
Application
These cables are used for transmission of analoge and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroluem plants, etc... . Instrumentation cables are not allowed for direct connection to a low impedance sources, e.g. public mains electricity supply. With blue sheath it is suitable for intrinsically safe systems. These cables are not recommended for direct burial. They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits.
Cable Design
Conductor
Plain copper wire, stranded IEC 60228 Sınıf 2, TS/DIN EN 60228 Sınıf 2
Insulation
PE compound, EN 50290-2-23
Core identification
Black / White ; with numbered tape under separator tape of the pair screen Upon request ; Black / White cores numbered 1-1, 2-2,… Other core configurations manufactured upon request.
Pair
Two conductors twisted to a pair
PIMF Construction
Polyester tape above the pair, AL-PES tape over solid tinned copper drain wire, 0,60 mm Upon request ; Stranded 0,50 mm2 copper drain wire
Lay-up
PIMF laid up in layers of optimum pitch
Separator
Polyester tape
Screen
Braid of tinned Cu wires, 85% coverage
Outer sheath
PVC comp., flame retardant; EN 50290-2-22
Sheath colour
RAL 9005, Black or RAL 5015, Blue
Technical Data
Standard
TS/DIN EN 50288-7
Insulation thickness
0,50mm2 : 0,40 mm 0,75mm2 : 0,40 mm 1,0mm2 : 0,40 mm 1,3mm2 : 0,45 mm 1,5mm2 : 0,45 mm
