RE-2G(St)HSWAH-CI-PIMF FE180 HALOGEN-FREE FIRE RESISTANT (CI) INSTRUMENTATION CABLES, EN 50288-7 MULTI-PAIR, SILICONE INSULATED, INDIVIDUAL & COLLECTIVE SCREENED, ARMOURED, HFFR SHEATHED
Marking
BIRTAS KABLO RE-2G(St)HSWAH-Cl PIMF FE 180 8 x 2 x 1mm2 2625 43 008 (HFFR) 90˚ C 500 V EN 50288-7 IEC 60331 Part no GOST-R CE....mt
Applications
These cables are used for transmission of analoge and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroluem plants, etc... These cables are used on the basis of a fixed operating mode, can continue with the supply of a power under the existing fire conditions and in the environments which have no corrosive gases are emitted in the event of fire. In case of fire, these cables inhibit the propagation of the flames whereby the development of smoke is extremely low. Instrumentation cables are not allowed for direct connection to a low impedance sources, e.g. public mains electricity supply. With blue sheath it is suitable for intrinsically safe systems. The armour above the inner sheath protects the cable from mechanical shocks. These cables are recommended for direct burial. They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits.
Cable Design
Conductor
Plain copper wire, stranded IEC 60228 Sınıf 2, TS/DIN EN 60228 Sınıf 2
Insulation
Special silicone rubber compound
Core identification
Black / Blue ; with numbered tape under separator tape of the pair screen Upon request ; Black / Blue cores numbered 1-1, 2-2,… Other core configurations manufactured upon request.
Pair
Two conductors twisted to a pair
PIMF Construction
Polyester tape above the pair, AL-PES tape over solid tinned copper drain wire, 0,60 mm Upon request ; Stranded 0,50 mm2 copper drain wire
Lay-up
PIMF laid up in layers of optimum pitch
Separator
Polyester tape
Screen
AL-PES tape over stranded tinned copper drain wire 0,50 mm2
Inner sheath
HFFR compound, EN 50290-2-27
Armour
Galvenized round steel wire, EN 10257-1
Outer sheath
HFFR compound, EN 50290-2-27
Sheath colour
RAL 9005, Black or RAL 5015, Blue
Technical Data
Min. bending radius
10 x D
Flame test
IEC 60332-1 & TS/DIN EN 60332-1 IEC 60332-3 & TS/DIN EN 50266-2-4
