RE-2G(St)H-CI FE180 MP HALOGEN-FREE FIRE RESISTANT (CI) INSTRUMENTATION CABLES, EN 50288-7 SINGLE & MULTI-PAIR, SILICONE INSULATED, COLLECTIVE SCREENED, HFFR SHEATHED
Marking
BIRTAS KABLO RE-2G(St)H-Cl FE 180 MP 4 x 2 x 1mm2 2619 43 004 (HFFR) 90˚ C 500 V EN 50288-7 IEC 60331 Part no GOST-R CE....mt
Applications
These cables are used for transmission of analoge and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroluem plants, etc... These cables are used on the basis of a fixed operating mode, can continue with the supply of a power under the existing fire conditions and in the environments which have no corrosive gases are emitted in the event of fire. In case of fire, these cables inhibit the propagation of the flames whereby the development of smoke is extremely low. Instrumentation cables are not allowed for direct connection to a low impedance sources, e.g. public mains electricity supply. With blue sheath it is suitable for intrinsically safe systems. These cables are not recommended for direct burial. They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits.
Cable Design
Conductor
Plain copper wire, stranded IEC 60228 Sınıf 2, TS/DIN EN 60228 Sınıf 2
Insulation
Special silicone rubber compound
Core identification
Black / Blue cores numbered 1-1, 2-2,… Upon request ; Colour coded according to IEC 60189-2 Other core configurations manufactured upon request.
Pair
Two conductors twisted to a pair
Lay-up
Pairs laid up in layers of optimum pitch
Separator
Polyester tape
Screen
AL-PES tape over stranded tinned copper drain wire 0,50 mm2
