RE-Y(St)Y-PIMF INSTRUMENTATION CABLES, BS 5308 PART 2 TYPE 1 MULTİ-PAİR, PVC INSULATED, INDIVIDUAL & COLLECTİVE SCREENED, PVC SHEATHED
Marking
BIRTAS KABLO RE-2Y(St)Y-PİMF 5 x 2 x 0.75mm2 1611 05 005 BS 5308 Part no GOST-R CE....mt
Applications
These cables are used for transmission of analoge and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroluem plants, etc... . Instrumentation cables are not allowed for direct connection to a low impedance sources, e.g. public mains electricity supply. These cables are not recommended for direct burial. They are for indoor and oudoor installation, in dry and wet locations; on racks, trays, in conduits.
Cable Design
Conductor
Plain annealed copper wire, BS 6360 0,50 mm2 and 0,75 mm2 flexible, or 1,5 mm2 stranded
Insulation
PVC compound, TI1, BS 6746
Core identification
White / blue ; with numbered tape under separator tape of the pair screen *Upon request ; Black / White cores numbered 1-1, 2-2,…
Pair
Two conductors twisted to a pair
PIMF Construction
Polyester tape above the pair, AL-PES tape over tinned copper drain wire, 0,50 mm2
Lay-up
PIMF laid up in layers of optimum pitch
Separator
Polyester tape
Screen
AL-PES tape over tinned copper drain wire 0,50 mm2
