RE-2Y(St)Y-fl-PIMF INSTRUMENTATION CABLES, BS 5308 PART 1 TYPE 1 MULTİ-PAİR, PE INSULATED, INDIVIDUAL & COLLECTİVE SCREENED, PVC SHEATHED
Marking
BIRTAS KABLO RE-2Y(St)Y-fl PİMF 5 x 2 x 0.50mm2 1602 11 005 BS 5308 Part no GOST-R CE....mt
Applications
These cables are used for transmission of analoge and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroluem plants, etc... . Instrumentation cables are not allowed for direct connection to a low impedance sources, e.g. public mains electricity supply. These cables are not recommended for direct burial. They are for indoor and oudoor installation, in dry and wet locations; on racks, trays, in conduits.
Cable Design
Conductor
Plain annealed copper wire, BS 6360 0,50 mm2 and 1,0 mm2 solid, 0,50 mm2 flexible or 1,5 mm2 stranded
Insulation
PE compound, BS 6234 Type03
Core identification
Black / blue ; with numbered tape under separator tape of the pair screen *Upon request ; Black / White cores numbered 1-1, 2-2,…
Pair
Two conductors twisted to a pair
PIMF Construction
Polyester tape above the pair, AL-PES tape over tinned copper drain wire, 0,50 mm2
Lay-up
PIMF laid up in layers of optimum pitch
Separator
Polyester tape
Screen
AL-PES tape over tinned copper drain wire 0,50 mm2
