LI2Y(St)CH-PIMF PE INSULATED, HALOGEN-FREE INDIVIDUALLY SCREENED DATA CABLES
Marking
BIRTAS KABLO LI2Y(St)CH PİMF 3 x 2 x 0.34mm2 1911 04 003 Part no GOST-R CE … mt
Application
These halogen-free İndividually screened flexible control and connecting cables are used in instrumentation and control engineering; in industrial electronics, computers, information and transmission systems office machines; data transmission cables for voice frequncy transmission. These cables can be use at EIA RS-232/422 connections (especially 0,22 mm2 / 0,34 mm2). Individual screen and consisting of tinned copper wires as screen provides protection against external pulses. It provides low capacitance with PE insulation and transmits the datas at longer distances. Also tinned copper drain wires for continuity of individual screen and for earthing. These cables are not intended for outdoor or underground installation.
Cable Design
Conductor
Flexible copper wires, plain; IEC 60228 Class 5, TS/DIN EN 60228 Class 5
Insulation
HFFR compound, HI2 , VDE 0207-23
Core identification
According to DIN 47100 or TS/DIN EN 50334 black cores with white numerals
Pair
Two conductors twisted to a pair
PIMF Construction
Wrapping of polyester tape , with drain wire (7 wires), AL-PES tape and polyester tape wrapping
Lay-up
PIMF laid up in layers of optimum pitch
Separator
Polyester tape
Screen
With drain wire under the AL-PES tape Braid of tinned Cu wires, 65% coverage
