JE-H(St)H Bd Z HALOGEN-FREE INSTALLATION CABLES FOR INDUSTRIAL ELECTRONICS
Marking
BIRTAS KABLO JE-H(St)H Bd Z 20 x 2 x 0.50mm2 1913 04 020 Part no GOST-R CE … mt
Application
These halogen-free screened installation cables twisted pairs (in pair form) are mainly used for industrial electronics, telecommunication , control, data engineering where low current consumptions are required and transmision of the data must be continuous where the connection of computers, information and transmission systems,the transmission of analogue and digital signals in processor-controlled equipment. Screen provides protection against external pulses. These cables are used at schools, airpots, hospitals, etc. and in the environments which have no corrosive gases are emitted in the event of fire. In case of fire, these cables inhibit the propagation of the flames whereby the development of smoke is extremely low.
Cable Design
Conductor
Plain copper conductor, solid
Insulation
HFFR compound, HI2 , VDE 0207-23
Core identification
VDE 0815 (Z) Z: The bundles are marked by means of a numbered helix.
Pair
Two conductors twisted to a pair
Bundle
4 pairs laid up to a bundle
Bundle identification
By spirals with imprinted numbers
Lay-up
Bundles laid up in layers
Separator
Polyester tape
Screen
Tinned Cu drain wire under the AL-PES tape
Outer sheath
HFFR compound, HM2, VDE 0207-24
Sheath colour
RAL 7001,Grey
Technical Data
Standard
DIN VDE 0815
Conductor resistance (loop) (20 oC)
0,80 mm : 73,2 MΩ/km
Insulation resistance
Min. 100 MΩ.km
Mutual Capacitance
Max. 100 nF/km This value may be exceeded by 20% by cables with up to 4 pairs
