JE-Y(St)Y Bd Z PVC INSULATED, INSTALLATION CABLES FOR INDUSTRIAL ELECTRONICS
Marking
BIRTAS KABLO JE-Y(St)Y Bd Z 24 x 2 x 0.80mm 1117 04 024 Part no GOST-R CE … mt
Applications
These screened installation cables twisted pairs (in pair form) are mainly used for industrial electronics, telecommunication , control, data engineering where low current consumptions are required and transmision of the data must be continuous where the connection of computers, information and transmission systems,the transmission of analogue and digital signals in processor-controlled equipment. Screen provides protection against external pulses. With blue sheath it is suitable for intrinsically safe systems. These cables are suitable for installation in dry and moist operating areas in buildings, above and beneath plaster as well as for permanent outdoor and wall installation on outer building walls.
Cable Design
Conductor
Plain copper conductor, solid
İzolasyon
PVC compound , YI3; VDE 0207-4
Core identification
VDE 0815 (Z), Z: The bundles are marked by means of a numbered helix
Pair
Two conductors twisted to a pair.
Bundle
4 pairs laid up to a bundle
Bundle identification
By spirals with imprinted numbers
Lay-up
Bundles laid up in layers
Separator
Polyester tape
Screen
Tinned Cu drain wire under the AL-PES tape
Outer sheath
PVC compound, YM1; VDE 0207-5
Sheath colour
RAL 7032,Grey or RAL 5015, Blue
Technical Data
Standard
DIN VDE 0815
Conductor resistance (loop) (20o C)
0,80 mm : 73,2 MΩ/km
Insulation resistance
Min. 100 MΩ.km
Mutual Capacitance
Max. 100 nF/km This value may be exceeded by 20% by cables with up to 4 pairs
Capacity Unbalanced
Max. 200 pF / 100 mt 20% of the values, at least one value up to 400 pF permitted
