RE-2G(St)HSWAH-CI FE180 HALOGEN-FREE FIRE RESISTANT (Cl) INSTRUMENTATION CABLES, EN 50288-7 SINGLE & MULTI-TRIPLE, SILICONE INSULATED, COLLECTIVE SCREENED, ARMOURED, HFFR SHEATHED
Beschriftung
BIRTAS KABLO RE-2G(St)HSWAH-Cl FE 180 10 x 3 x 0.50mm2 2624 41 010 (HFFR) 90˚ C 500 V EN 50288-7 IEC 60331 Part no GOST-R CE....mt
Anwendung
These cables are used for transmission of analoge and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroluem plants, etc... These cables are used on the basis of a fixed operating mode, can continue with the supply of a power under the existing fire conditions and in the environments which have no corrosive gases are emitted in the event of fire. In case of fire, these cables inhibit the propagation of the flames whereby the development of smoke is extremely low. Instrumentation cables are not allowed for direct connection to a low impedance sources, e.g. public mains electricity supply. With blue sheath it is suitable for intrinsically safe systems. The armour above the inner sheath protects the cable from mechanical shocks. These cables are recommended for direct burial. They are for indoor and outdoor installation, in dry and wet locations; on racks, trays, in conduits.
Kabel Design
Conductor
Plain copper wire, stranded IEC 60228 Sınıf 2, TS/DIN EN 60228 Sınıf 2
Insulation
Special silicone rubber compound
Core identification
Black / Blue / Red cores are numbered (1-1-1, 2-2-2,…) Upon request ; Colour coded according to IEC 60189-2 Other core configurations manufactured upon request.
Pair
Two conductors twisted to a pair
Lay-up
Triples laid up in layers of optimum pitch
Separator
Polyester tape
Screen
AL-PES tape over stranded tinned copper drain wire 0,50 mm2
