RE-Y(St)YSWAY-fl INSTRUMENTATION CABLES, BS 5308 PART 2 TYPE 2 MULTİ-CORE, PVC INSULATED, COLLECTİVE SCREENED, ARMOURED, PVC SHEATHED
Beschriftung
BIRTAS KABLO RE-2Y(St)YSWAY-fl 20 x 0.50mm2 1612 05 020 BS 5308 Part no GOST-R CE....mt
Anwendung
These cables are used for transmission of analoge and digital signals in instrument and control systems at chemistry and petrochemistry industry plants, power plants, natural gas and petroluem plants, etc... . Instrumentation cables are not allowed for direct connection to a low impedance sources, e.g. public mains electricity supply. The armour above the inner sheath protects the cable from mechanical shocks. These cables are recommended for direct burial. They are for indoor and oudoor installation, in dry and wet locations; on racks, trays, in conduits.
Kabel Design
Conductor
Plain annealed copper wire, BS 6360 0,50 mm2 and 0,75 mm2 flexible, or 1,5 mm2 stranded
Insulation
PVC compound, TI1, BS 6746
Core identification
Up to 40 cores; yellow with black numbers and word printed (1-40), (10,TEN); up to 80 cores; black with yellow numbers and word printed (1-40), (10,TEN)
Lay-up
Cores laid up in layers of optimum pitch
Separator
Polyester tape
Screen
AL-PES tape over tinned copper drain wire 0,50 mm2
