background
TR  EN  DE  RU

Kabel Produkte

Zurück zur Produkt Liste
Birtas Kabel - Birtaş – Marktführer von Industrie- und Spezialkabeln bis 1kV in der Türkei
Halogenfreie Telefonkabel
HBH & HBH-K
HBAPH & HBAPH-K
HDH & HDH-K
PDH & PDH-K
J-HH…Bd
J-H(St)H…Bd
J-HH…Lg
J-H(St)H…Lg
J2Y(St)H...Bd
PD-PAH
SHDSH-FR FE180
J-H(St)H...Bd BMK
Downloads
Birtaş Kablo - Kumanda Kabloları 2YSLCY-J
Product Data Sheet
Local Quality Certificates
International Quality Certificates
Product Price List
Test Reports
Package Style
Summary Table
Beispiel Referenzen
ISTINYE PARK SHOPPING CENTER
KORUPARK SHOPPING CENTER
FORUM MERSİN SHOPPING CENTER
CEPA SHOPPING CENTER
KANYON SHOPPING CENTER
ISTANBUL TEKSTİLKENT
HALOGENFREIE TELEFONKABEL
SHDSH-FR FE180 & SHDSH-K-FR FE180 & SHDH-FR FE180 & SHDH-K-FR FE180
SILICONE INSULATED, HALOGEN-FREE INDOOR TYPE TELEPHONE CABLES
Beschriftung

Anwendung

These cables fields of use are fire proof and halogen free cables which, on the basis of a fixed operating mode, can continue with the supply of a power for a period of 180 minutes under the existing fire conditions (at a temperature of 750OC and under the flames ). Also these cables shall satify EN50200 test which is a fire resistant with mechancal shock test (under the conditions at 842oC and mechenical shock) by the classes PH15-PH30-PH60-PH90, if it has requsted,These cables are used as telephone cables inside the buildings for signal transmision and subscriber distribution purposes. SHDSH-K has tinned copper conductor which this cable is used especially at humudity places; ambient air temperature between -60oC and +180 oC. These cables are used at schools, airpots, hospitals, etc. and in the environments which have no corrosive gases are emitted in the event of fire. In case of fire, these cables inhibit the propagation of the flames whereby the development of smoke is extremely low.

Kabel Design
ConductorAnnealed copper conductor, solid; or
Tinned copper conductor, solid (-K)
InsulationSpeacial silicone rubber compound
Core identificationAccording to IEC 708
Star quadsTwisted to a star quad, in different lay-length
Lay-upUp to 10 pairs laid up as star-quads
After 10 pairs, 5 star quads laid up to a subunit.
And 5 or 10 subunits laid up to a unit.
Note: ARMOUR configurations manufactured upon
request and also it could be with 2 core twisted pairs.
SeparatorPolyester tape (after 10 pairs)
Outer sheath
(SHDSH-FR FE180 & SHDSH-K-FR FE180)
Speacial silicone rubber compound
Sheath colour
(SHDSH-FR FE180 & SHDSH-K-FR FE180)
RAL 3000, Red
Wrapping
(SHDH-FR FE180 & SHDH-K-FR FE180)
Fiber glass textile tape
Separator
(SHDH-FR FE180 & SHDH-K-FR FE180)
Polyester tape (after 10 pairs)
Outer sheath
(SHDH-FR FE180 & SHDH-K-FR FE180)
HFFR compound, HM4, VDE 0207-24
Sheath colour
(SHDH-FR FE180 & SHDH-K-FR FE180)
RAL 3000, Red
Technische Daten
StandardTS 3930 / IEC 708 / BS 7629
TS 2814 / IEC 60189-2
Insulation resistanceMin. 100 MΩ.km
Mutual CapacitanceMax. 85 nF/km
Capacity Unbalanced500 pF / km (Between pairs)
Operating voltage, peak250 V
Dielectric strength DC1000 V
Temperature range- 60 oC ~ + 180 oC
Min. bending radius10 x D
Flame testIEC 60332-3 & TS/DIN EN 50266-2-4
Smoke density testIEC 61034-2 & TS/DIN EN 61034-2
Halogen-free properties testIEC60754-1/2 & TS/DIN EN 50267-2
Insulation integrityIEC 60331 , VDE 0472-814
Fire resistant with mechanical shock
*Fire resistant with mechanical shock
DIN EN 50200 ; PH 15 (15 minutes)
DIN EN 50200 ; PH 30 (30 minutes)
DIN EN 50200 ; PH 60 (60 minutes)
DIN EN 50200 ; PH 90 (90 minutes)
Querschnitt
Part-NumberNo. of Cores x
Cross Section (mm2)
Approx. Outer Diameter (mm)Copper Weight (Kg/km)Approx. Cable Weight (Kg/km)
Zum Seitenanfang 
Copyright © Etabir Birlesik Kablo Sanayi ve Ticaret A.S. - 2012. All rights reserved. design: plusmax